No internet. Modem starts at scanning then syncing then ranging then ranged then network entry then software download. Then it starts over the process again. Any ideas what is going on?
No internet. Modem starts at scanning then syncing then ranging then ranged then network entry then software download. Then it starts over the process again. Any ideas what is going on?
Well, I did it. Boy did I ever.........
VS-1 Exede12-1 SB 334...AcceleNet Server Location Dallas TX..TP-LinkTL-R470T+ wired router, with Engenius 3500 access point , Dell XPS., Dell Desktop w/Windows 7 PRO
My current software version is ut_1.4.0.2.0.
I powered off the modem 3 times with no luck.
On hold with cs now.
Well, I did it. Boy did I ever.........
That is the version I have and been good, hope you get it going, is it trying to go backwards to older version, I had that issue for a while, very irritating, would load up the old version and cyle like yours is.....maybe cs can help with it while it is doing it at the moment........
VS-1 Exede12-1 SB 334...AcceleNet Server Location Dallas TX..TP-LinkTL-R470T+ wired router, with Engenius 3500 access point , Dell XPS., Dell Desktop w/Windows 7 PRO
Thanks gman!
Well, I did it. Boy did I ever.........
On hold for one hour thirty minutes and got cut off. Unplugging the modem and going to bed. Guess my wb honeymoon is over.
Well, I did it. Boy did I ever.........
Hope it works in the am, shame to be on hold that long.
I have heard of some modems doing great after a night off,,,,,,,,wierd.
VS-1 Exede12-1 SB 334...AcceleNet Server Location Dallas TX..TP-LinkTL-R470T+ wired router, with Engenius 3500 access point , Dell XPS., Dell Desktop w/Windows 7 PRO
Plugged modem in and back online.
Now my transmit modem light blinks all the time.
Well, I did it. Boy did I ever.........
My modem stated cycling last night about 6:30 pm CDT. It was still doing this at 12:00 when I went to bed. It is working fine this morning. I have the same firmware version as I had before it started, UT_1.4.0.2.0.
Joe, do you have local weather conditions like heavy cloud cover, mist/rain? The third light will blink occasionally to maintain satellite lock...if the light blinks all the time when no internet activity is being used it usually indicates the modem is having a difficult time staying locked to the satellite.
A slightly misaligned dish can also cause this..and, of course, there are other possibilities like a marginal Tria, Modem or bad cable/connection, but weather or dish alignment are the most common causes.
Test your download speed, and especially test your upload speed..maybe this can help narrow down the cause.
Click this link and check all the entries for both modem and Tria...also look for any red icons..
http://192.168.100.1/
WB Legacy 2/12/09, 2/23/12 to Exede12-1 SB 342, Albuquerque Gateway, AcceleNet servers Denver, Dell Desktop XP-Home SP3, D-Link DIR655 Router, Dell Laptop Vista Home Basic SP2, Chrome browser .